Language
  1. English
  2. Chinese
language
中国
韩国
韩国
韩国
韩国
韩国
Language
  1. English
  2. Chinese
language
中国
韩国
韩国
韩国
韩国
韩国

NEWS

NEWS
Your location:
Homepage
/
/
/
Cleaning and maintenance of Fiber Laser Lenses

Cleaning and maintenance of Fiber Laser Lenses

(Summary description)The Fiber Laser Lenses and nozzles of the fiber laser cutting machine are consumables, especially the Fiber Laser Lenses, which include protective lenses, collimating lenses, and focusing lenses. Pay more attention to the usual placement, inspection, and installation.

Cleaning and maintenance of Fiber Laser Lenses

(Summary description)The Fiber Laser Lenses and nozzles of the fiber laser cutting machine are consumables, especially the Fiber Laser Lenses, which include protective lenses, collimating lenses, and focusing lenses. Pay more attention to the usual placement, inspection, and installation.

Information

The Fiber Laser Lenses and nozzles of the fiber laser cutting machine are consumables, especially the Fiber Laser Lenses, which include protective lenses, collimating lenses, and focusing lenses. Pay more attention to the usual placement, inspection, and installation. Damage and contamination. During the laser cutting process, a large amount of gas and metal impurities will be released from the working surface. These gas and splashes will cause damage to the Fiber Laser Lenses. When contaminants fall on the surface of the lens, energy will be absorbed from the laser beam, resulting in a thermal lens effect. During the installation and cleaning of the Fiber Laser Lenses, any sticky matter will increase the absorption rate of the Fiber Laser Lenses and reduce the service life. Therefore, you must pay attention to the following measures during operation:

Fiber Laser Lenses

1. Do not install Fiber Laser Lenses directly with your fingers, but wear finger cots or rubber gloves.

2. Do not use hard instruments to avoid scratches on the surface of the Fiber Laser Lenses.

3. When installing and removing the lens, do not touch the film, but hold the edge of the Fiber Laser Lenses.

4. Fiber Laser Lenses should be placed in a dry and tidy place for testing and cleaning to prevent secondary contamination of impurities.

5. When cleaning the Fiber Laser Lenses, first blow off the floats on the original surface, especially the lenses with tiny particles and floccules on the surface, but do not use compressed air on the production line, because these air will contain some Oil mist and water droplets will deepen the pollution of the lens.

The above are some small methods for the cleaning and maintenance of Fiber Laser Lenses, I hope it will be helpful to your Fiber Laser Lenses.

Keyword:

Scan the QR code to read on your phone

SuzhouYosoon laser equipment Co.,Ltd

Focus on the application and development of the laser industry

Innovation is the source of enterprise development

Business integrity, win-win cooperation

Contact details 

Address: No. 31 Tangxi Road, Huqiu District, Suzhou City

Tel:Vivian Yu +86(0)18896540037 (wechat/whatsapp/mobile)

E-mail:vivian@alsgroup.cn

Web:www.yosoon.cn

Message:Request message response within one hour

© 2019 SuzhouYosoon laser equipment Co.,Ltd Copyright © 1999-2018 All Rights Reserved       苏ICP备19073043号   Powered by www.300.cn

© 2019 SuzhouYosoon laser equipment Co.,Ltd Copyright

© 1999-2018 All Rights Reserved 

苏ICP备19073043号

Powered by www.300.cn

Please fill in your requirements

Username used for comment:
Customer message
Description: