Language
  1. English
  2. Chinese
language
中国
韩国
韩国
韩国
韩国
韩国
Language
  1. English
  2. Chinese
language
中国
韩国
韩国
韩国
韩国
韩国

NEWS

NEWS
Your location:
Homepage
/
/
/
Precautions for use of laser marking machines china

Precautions for use of laser marking machines china

(Summary description)Laser marking machines china with a laser wavelength of 1064um is harmful to human skin during work, so operators must pay attention to safety during use.

Precautions for use of laser marking machines china

(Summary description)Laser marking machines china with a laser wavelength of 1064um is harmful to human skin during work, so operators must pay attention to safety during use.

Information

Laser marking machines china with a laser wavelength of 1064um is harmful to human skin during work, so operators must pay attention to safety during use. When laser marking machines china is working, it is very dangerous if there is a malfunction. Novices must be trained by professionals to operate independently. The specific operations are as follows:

Laser marking machines china

1. Comply with the safety operation regulations of laser marking machines china. Start the laser strictly in accordance with the laser startup procedure.

2. Operators must be trained, familiar with the structure and performance of laser marking machines china, and master the relevant operating system knowledge.

3. Wear labor protection equipment as required, and wear protective glasses that meet the requirements near the laser beam.

4. Before clarifying whether a certain material can be irradiated with laser or before heating, do not process it to avoid the potential danger of smoke and steam.

5. When laser marking machines china is activated, the operator shall not leave the post without authorization or be left unattended. If they need to leave, they should turn off or cut off the power switch.

6. Place the fire extinguisher within reach; turn off the laser or shutter when not working; do not place paper, cloth or paper near the unprotected laser beam. Other flammable products.

7. If an abnormality is found during processing, the machine should be shut down immediately, and the fault should be eliminated or reported to the supervisor in time.

8. Keep the laser, the bed and the surrounding area clean and tidy, orderly and free of oil, and stack the workpieces, plates, and waste materials according to regulations.

9. When using gas cylinders, avoid crushing the welding wire to avoid leakage accidents. The use and transportation of gas cylinders should comply with the gas cylinder inspection regulations. Do not explode gas cylinders in the sun or near heat sources. When opening the bottle valve, the operator must stand on the side of the bottle mouth.

10. Please observe the high voltage safety regulations when repairing laser marking machines china. Maintenance shall be carried out every 40 hours of operation or once a week, and every 1000 hours of operation or once every six months, and shall be carried out in accordance with regulations and procedures.

11. After starting the machine, manually start the machine at low speed in the X and Y directions, and check whether there is any abnormality.

12. After inputting the new part program, test run it first to check its operation.

13. Pay close attention to the operation of the machine when working to avoid abnormal operation of laser marking machines china and cause accidents.
 

Keyword:

Scan the QR code to read on your phone

SuzhouYosoon laser equipment Co.,Ltd

Focus on the application and development of the laser industry

Innovation is the source of enterprise development

Business integrity, win-win cooperation

Contact details 

Address: No. 31 Tangxi Road, Huqiu District, Suzhou City

Tel:Vivian Yu +86(0)18896540037 (wechat/whatsapp/mobile)

E-mail:vivian@alsgroup.cn

Web:www.yosoon.cn

Message:Request message response within one hour

© 2019 SuzhouYosoon laser equipment Co.,Ltd Copyright © 1999-2018 All Rights Reserved       苏ICP备19073043号   Powered by www.300.cn

© 2019 SuzhouYosoon laser equipment Co.,Ltd Copyright

© 1999-2018 All Rights Reserved 

苏ICP备19073043号

Powered by www.300.cn

Please fill in your requirements

Username used for comment:
Customer message
Description: