Language
  1. English
  2. Chinese
language
中国
韩国
韩国
韩国
韩国
韩国
Language
  1. English
  2. Chinese
language
中国
韩国
韩国
韩国
韩国
韩国

NEWS

NEWS
Your location:
Homepage
/
/
/
What should I do if the laser capacitor head touches the board

What should I do if the laser capacitor head touches the board

(Summary description)When the laser cutting machine is cutting the workpiece, it is a common fault that the laser capacitor head touches the plate. Whether it is a metal laser cutting machine or an ordinary gas solid laser cutting machine, do not panic when you encounter this type of plate collision during use.

What should I do if the laser capacitor head touches the board

(Summary description)When the laser cutting machine is cutting the workpiece, it is a common fault that the laser capacitor head touches the plate. Whether it is a metal laser cutting machine or an ordinary gas solid laser cutting machine, do not panic when you encounter this type of plate collision during use.

Information

When the laser cutting machine is cutting the workpiece, it is a common fault that the laser capacitor head touches the plate. Whether it is a metal laser cutting machine or an ordinary gas solid laser cutting machine, do not panic when you encounter this type of plate collision during use. , Turn off the laser device and find the source of the touch board. First of all, if the laser cutting is unstable, it will hit the board or the following distance will be wrong. At this time, you can replace the laser capacitor head, or the laser capacitor head is overheated and the parameters are not correct, which may cause the cutting head to hit the board. of. But no matter what the reason is, it is basically because the capacitance value of the tunnel head changes, which leads to the stability of the laser capacitor head.

Laser capacitor head

If the laser capacitor head is unstable, you can re-determine the capacitance value, reset and save the parameters. Summarize some experience for your reference in actual operation. After the laser capacitor head touches the board, it is normal. This situation is usually due to the parameter setting. You can reduce the upper limit and the lower limit of the laser capacitor head in the same proportion, and the laser capacitor head will follow it normally; the laser cutting head follows the distance Too high. Open the follow-up head debugging software and observe whether the following distance is set correctly; adjust the upper limit and lower limit of the cutting head, increase in the same proportion, and test to the appropriate value; during the cutting process, the laser capacitor head suddenly rises automatically. When this happens, stop the laser work and observe whether the copper nozzle of the follower head is heating up. If it is heating, it means that the laser light path is not correct, which causes the copper nozzle to overheat and the capacitance value changes. Adjust the light path and the problem can be solved.

Basically, everyone has already understood the situation of the laser capacitor head bumping. If the laser capacitor head bumps during the subsequent use, you must pay attention to it. Stop the machine before doing other operations to avoid major drawbacks.
 

Keyword:

Scan the QR code to read on your phone

SuzhouYosoon laser equipment Co.,Ltd

Focus on the application and development of the laser industry

Innovation is the source of enterprise development

Business integrity, win-win cooperation

Contact details 

Address: No. 31 Tangxi Road, Huqiu District, Suzhou City

Tel:Vivian Yu +86(0)18896540037 (wechat/whatsapp/mobile)

E-mail:vivian@alsgroup.cn

Web:www.yosoon.cn

Message:Request message response within one hour

© 2019 SuzhouYosoon laser equipment Co.,Ltd Copyright © 1999-2018 All Rights Reserved       苏ICP备19073043号   Powered by www.300.cn

© 2019 SuzhouYosoon laser equipment Co.,Ltd Copyright

© 1999-2018 All Rights Reserved 

苏ICP备19073043号

Powered by www.300.cn

Please fill in your requirements

Username used for comment:
Customer message
Description: